Home > Products > Fibre Optical Cables > Optic Fibre Cable (Single Sheath)
- 1. One Central Poly Butylene Terephthalate(PBT) loose tube.
- 2. Optic Fibres are housed in loose tube.
- 3. Thixotropic jelly injected in loose tube with Fibre.
- 4. WST is wrapped with the loose tube to make cable water-proof.
- 5. Loose tube is covered with a corrugated SS tape / ECCS tape.
- 6. FRP rods or steel wires embedded within the HDPE jacket.
- 7. Anti-termite HDPE jacket extruded over corrugated SS tape.
|
Applications
|
|
| Technical Specifications From 6F to 48F Cable | ||||||||||||||||||||||||||||||||
| Description | Typical Values | |||||||||||||||||||||||||||||||
| Single Mode Optic Fibre | Complying to ITU G. 652 | |||||||||||||||||||||||||||||||
| Fibre Colour Code | Blue, Orange, Green, Brown, Slate/ Grey, White, Red, Black, Yellow, Violet, Rose / Pink, Natural / Aqua | |||||||||||||||||||||||||||||||
| Buffer Loose Tube Colours(Optional) | Natural, Blue, Orange, Green | |||||||||||||||||||||||||||||||
| Optical Performance | Attenuation @ 1310nm, ≤ 0.38dB / km, Attenuation @ 1550nm, ≤ 0.25dB / km | |||||||||||||||||||||||||||||||
| Mechanical Performance | Tensile Strength | Min Bend Radius | Impact | Torsion | ||||||||||||||||||||||||||||
| 1W | 1.3W | 2.0W | 2.5W | 20D | 50N | 400N | ||||||||||||||||||||||||||
| Enviornmental Performance | Temperature | Operating | Installation | Storage / Shipping | ||||||||||||||||||||||||||||
| Specification | -20°C to + 70° C | -20°C to + 70° C | -30°C to + 70° C | |||||||||||||||||||||||||||||
| Physical |
|
|||||||||||||||||||||||||||||||
| Testing & Inspection |
|
|||||||||||||||||||||||||||||||